Index:

1.0 INTRODUCTION

2.0 INSTALLATION

    2.1	Knowledge Base Preparation

    3.1	Initiate LabVIEW/Diagnostician Conversation (OPEN_DOC)
    3.2	Pass Test Results to the Diagnostician (TELL_DOC)
    3.3	Request Diagnostician Results (ASK_DOC)
    3.4	Terminate Conversation (CLOSE_DOC)
    3.5	Conversation Flow

    4.1	Go/No-Go Control Mode
    4.2	Diagnostician Control Mode
    4.3	Mixed Control Mode
    4.4	Reporting Test Results to the Diagnostician

    5.1	Run-Time Configuration File
    5.2	Diagnostician Interface  to LabVIEW

    A.1    Defining Tests
    A.2    Defining Test Coverage
    A.3    Define Test Executable Name
    A.4    System Test
    A.5    Test Results
    A.6    Test Program Provisions
    A.6.1  Generate Test Results and Pass Test Result Data